American Artifacts
Site Contents online articles online catalogbarn swallow nest cups

Pulleys, Gears and Sprockets

Added 8/22/15
tight and loose flat pulleys
line shaft
Two pairs of tight and loose pulleys on countershaft.  The pair of large pulleys are 15 1/2" x 3 1/4". The small wooden pair are 4" diameter by 2 3/4" wide face. The wood drive pulley is approx 8" diameter by 5 1/4" wide face and has a leather belt tacked to it . The 1 1/4" shaft is 44" long. Note that what appear to be bearings on the end of the shaft are not included.  They are brackets for the axle of a corn sheller and would not suffice as line shaft bearings. I used them in the photo to prevent the shaft from rolling off the blocks. The loose pulleys turn smoothly.  $75 (pickup only).
4 step iron pulley
cloverleaf cutout gear
4 step pulley with 1 1/4" hole, 2" faces
5 1/8", 6 5/8", 8 1/4", 9 5/8" dia. steps
Item p1...................$40 plus shipping

.
14" dia cloverleaf cutout gear
Item p7...........$45 plus shipping

.
Wooden pulleys and shaft
large wooden pulleys on wood shaft
Large wood pulleys and shaft - 36" long wood shaft with 2" long 15/16" dia iron extension on each end. The 3 pulleys measure 10 1/2"x 2", 19" x 3 1/2", and 16" x 3"
Item p3....................................................................$75 buyer pickup only
.

Large wooden split pulley
22" dia wood split pulley with 2" inserts and 6 3/8" face.
The clamps and bolts are in good order and the pulley is sound
Item p4........................................................$50 - buyer pickup
Wood split pulley
wooden split pulley for lineshaft
25 3/4" Wooden split pulley with 1 3/8" inserts and 4 7/8" face. Good cond.
Item p5....................................................................................$50
large wood pulley with iron flange
large wood pulley
16 1/2" dia wood pulley with 4" face and iron flange on one side with 1 7/16" hole
Item p6.................................................................................................................$45
.
Decorative 10" sprocket
iron sprocket
10" dia sprocket with 1 15/16" shaft hole
Item p8...........................20 plus shipping
.
large gears from IHC potato digger
18" dia gears from a McCormick Deering potato digger, 2 1/4" shaft hole, 1 3/4" wide teeth
Item p9................................................................$60 each - buyer pickup
lineshaft hangers
lineshaft bearings
Line shaft bearing pair with grease cups, 1 7/16" hole. Original use unknown
Item p10.........................................................................$10 each plus shipping
.
Lineshaft speed reducer
9" x 1 3/4" larger pulley, 4"x 2" smaller pulley, 1 1/4" shaft.
Hangers can be mounted overhead or on the floor.
Good working order.....................SOLD
lineshaft speed reducer
flat belt tensioner
Flat belt tensioner/guide with 4" x 1 3/4" pulley fitted with grease cup.  Good bearing
Item p11.........................................................................SOLD
.
9 wooden pulleys
wooden flat pulleys
An assortment of 9 wooden pulleys
Item p12   SOLD
.
iron flange wood pulley
6 spoke pulley
Two iron flange wood pulleys with 1 3/16" holes
5 1/2 x 3 1/2dia and 3 1/4" x 4 1/2"dia
Item p14...............$25 for the pair plus shipping
.
flat pulley 13 3/4" x3 1/4", 1" hole
Item p2......30 plus shipping
.
Note: Many of the larger pulleys above are for pickup only. If you use a shipper, we can arrange to be home to meet them. However, a tractor trailer cannot negotiate our long lane. For smaller items, shipping will be the actual cost, based on your zip code. Some smaller items will fit in the Priority flat rate boxes. Also, I can refer you to a local shipper who makes frequent trips to NYC and as far west as Ohio. Storage at this end for as long as you need is no problem. Our zip code is 21787.
 
Back to catalog

Contact: Richard Van Vleck - Email: richard@americanartifacts.com

Email your zip code for shipping cost or to reserve item and receive a Paypal request for payment.

© 2015, American Artifacts, Taneytown, Maryland.